AUGUSTINE High Quality PIR Sensor Raspberry Pi Module Body Motion Sensor Sensor Detector Infrared for 1PCS IR Pyroelectric/Multicolor
Sản phẩm AUGUSTINE High Quality PIR Sensor Raspberry Pi Module Body Motion Sensor Sensor Detector Infrared for 1PCS IR Pyroelectric/Multicolor đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 32.600 xuống còn ₫ 17.930, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Induction of lens size: diameter: 23mm (default)
Static current: <50uA
High level output: 3.3 V / low 0V
Working temperature: -15-+70 degrees
Trigger mode: L unrepeatable trigger /H repeated trigger (Default Repeating trigger)
Package Included:1pcs New HC-SR501 Infrared PIR Motion Sensor Module
Blocking time: 2.5S (the default) can be produced range 0.1 seconds, tens of seconds
Working voltage range: DC 4.8-20V
Induction angle: <100 degree cone angle
Delay time: 0.5-200S (adjustable) can be produced range 0.1 seconds - a few minutes
Size: 32mm*24mm circuit board
Description:
It is great for microcontrollers such as for funduino and many more including the rasberry pi!
It is a HC--SR501 Sensor Module
With an operating voltage of 5v to 20v
Operating voltage. It has a high value of 3.3 volts and a low of 0 (it is either on or off). It's delay time can be adjusted from 5 to 200seconds as well as the sensing range from 3meter to 7meters. The entire sensor with the board is 32mm by 24mm (standard pir motion sensor). The sensor either gives off a 3.3volt high value when motion is detected and then resumes or continues to give off a 0 voltage when no motion is detected. If you use an arduino or other micro controllers you can use the 3.3 volt out to power the sensor or use the 5volt power pin (vcc) to power the sensor. Either one will work.