1 Channel 1CH Relay Module High Low Level Trigger w/ Optocoupler DC 5V/9V/12V/24V
31.989
₫ 24.787
Sản phẩm 1 Channel 1CH Relay Module High Low Level Trigger w/ Optocoupler DC 5V/9V/12V/24V đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 31.989 xuống còn ₫ 24.787, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description :
1, The module uses genuine quality relay , normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;
2, Using SMD optocoupler isolation , driving ability , stable performance ; trigger current 5mA;
3,The module voltage is 5V, 9,12 V, 24V are available ;
4,The module can be set to high or low triggered by jumper ;
5,Fault-tolerant design , even if the control line is broken , the relay will not operate ;
6,The power indicator ( green ) , relay status indicator ( red );
7,Interface design humane, all interfaces can be connected directly via terminal wiring leads , very convenient;
8,Module size : 50mm * 26mm * 18.5mm ( L * W * H );
9,Has four mounting bolts holes , hole 3.1mm, 44.5mm * 20.5mm pitch.
Two module interface :
1, DC +: Positive power supply ( voltage required by the relay , there 5V.9V.12V and 24V choice );
2, DC-: Negative power connection;
3, IN: Can be high or low level control relay.
Relay outputs :
1, NO: Normally open relay interface, the relay before the vacant after the pull shorted with COM;
2, COM: Common Interface Relays;
3, NC: Normally closed relay interface relay shorted with COM ago , after the pull- vacant.
High and low trigger selection ends :
1 short jumper with LOW LOW triggered when connected ;
2 When the jumper is high with high short trigger .
Package Included:
1 x DC 5V/9V/12V/24V Relay Module with Optocoupler
#DIYMORE #Optocoupler #Relay #Module #tr
1, The module uses genuine quality relay , normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;
2, Using SMD optocoupler isolation , driving ability , stable performance ; trigger current 5mA;
3,The module voltage is 5V, 9,12 V, 24V are available ;
4,The module can be set to high or low triggered by jumper ;
5,Fault-tolerant design , even if the control line is broken , the relay will not operate ;
6,The power indicator ( green ) , relay status indicator ( red );
7,Interface design humane, all interfaces can be connected directly via terminal wiring leads , very convenient;
8,Module size : 50mm * 26mm * 18.5mm ( L * W * H );
9,Has four mounting bolts holes , hole 3.1mm, 44.5mm * 20.5mm pitch.
Two module interface :
1, DC +: Positive power supply ( voltage required by the relay , there 5V.9V.12V and 24V choice );
2, DC-: Negative power connection;
3, IN: Can be high or low level control relay.
Relay outputs :
1, NO: Normally open relay interface, the relay before the vacant after the pull shorted with COM;
2, COM: Common Interface Relays;
3, NC: Normally closed relay interface relay shorted with COM ago , after the pull- vacant.
High and low trigger selection ends :
1 short jumper with LOW LOW triggered when connected ;
2 When the jumper is high with high short trigger .
Package Included:
1 x DC 5V/9V/12V/24V Relay Module with Optocoupler
#DIYMORE #Optocoupler #Relay #Module #tr
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000