Mô Đun Màn Hình Lcd Ips Tft St7735 Spi 3.3v Cho Arduino
105.000
₫ 64.000
Sản phẩm Mô Đun Màn Hình Lcd Ips Tft St7735 Spi 3.3v Cho Arduino đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 105.000 xuống còn ₫ 64.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
1. LCD Size: 0.96 /1.3 inch
2. Dot Matrix Size: 80*160 (Display direction can be adjusted, horizontal screen and vertical screen are ok)
3. LCD Color: 65K Full Color
4. Hardware Interface: SPI interface
5. Driver IC: ST7735
6. Operating Temperature: -20 - 70
8. Working Power Supply: 3.3V
9. PIN NO: 13Pin
10. Display Area: 10.8*21.696mm
11. Size: 13.3*27.95mm
12 Viewing Direction: Full viewing angle (IPS)
1 GND
2 VCC (3.3-5 v)
3 SCL (SPI clock line)
4 SDA (SPI data cable)
BLCK-LCD backlight control, the default can be left floating, low level to turn off the backlight
RES-OLED reset, OLED needs to be reset after power-on
DC-SPI data/command selection pin
Specification:
CS is a chip selection.This signal is called chip selection signal, generally cs, chip selection terminal received a legitimate chip selection signal will enter the working state,We can write or read it.Bank and chip select are mainly used for address decoding
Product list:
1pc HD IPS inch 1.3 inch TFT display OLED st7735
Note:
1.Due to the manual measurement and different measurement methods, please allow 2-3cm deviation.
2.Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly different.
#Serial #Shield #Blue #Backlight #1pcs #3.3V #HD #LCD #Arduino #Di
1. LCD Size: 0.96 /1.3 inch
2. Dot Matrix Size: 80*160 (Display direction can be adjusted, horizontal screen and vertical screen are ok)
3. LCD Color: 65K Full Color
4. Hardware Interface: SPI interface
5. Driver IC: ST7735
6. Operating Temperature: -20 - 70
8. Working Power Supply: 3.3V
9. PIN NO: 13Pin
10. Display Area: 10.8*21.696mm
11. Size: 13.3*27.95mm
12 Viewing Direction: Full viewing angle (IPS)
1 GND
2 VCC (3.3-5 v)
3 SCL (SPI clock line)
4 SDA (SPI data cable)
BLCK-LCD backlight control, the default can be left floating, low level to turn off the backlight
RES-OLED reset, OLED needs to be reset after power-on
DC-SPI data/command selection pin
Specification:
CS is a chip selection.This signal is called chip selection signal, generally cs, chip selection terminal received a legitimate chip selection signal will enter the working state,We can write or read it.Bank and chip select are mainly used for address decoding
Product list:
1pc HD IPS inch 1.3 inch TFT display OLED st7735
Note:
1.Due to the manual measurement and different measurement methods, please allow 2-3cm deviation.
2.Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly different.
#Serial #Shield #Blue #Backlight #1pcs #3.3V #HD #LCD #Arduino #Di