Mô Đun Đồng Hồ Rtc Ds1302 Cho Arduino

RTC DS1302 Real Time Clock Module For AVR ARM PIC For Arduino

Description:
The DS1302 is a trickle charge clock chip from DALLAS that contains a real-time clock / calendar and 31 bytes of static RAM to communicate with the microcontroller through a simple serial interface. Real-time clock / calendar circuit provides seconds, minutes, hours, days, weeks, months, years of information, the number of days per month and leap year number of days can be adjusted automatically. The clock operation can be determined by the AM / PM indication in a 24 or 12 hour format. (1) RST reset (2) I / O data lines (3) SCLK serial clock. (1) RST reset (2) I / O data lines (3) SCLK serial clock. Clock / RAM read / write data in a byte or up to 31 bytes of character group communication. DS1302 power consumption is very low to maintain data and clock information when the power is less than 1mW

Features:
real-time clock with 2100 can be calculated before the seconds, minutes, hours, days, weeks, months, years of ability, as well as leap year adjustment
31 8-bit temporary data storage RAM
Serial I / O port mode makes the pin count the least
Wide operating voltage 2.0V
working current 2.0V, less than 300nA
Read / write clock or RAM data, there are two transfer methods Single byte transfer and multi-byte transmission character group mode
8-pin DIP package or optional 8-pin SOIC package according to surface mount
simple
3-wire interface compatible with TTL Vcc = 5V
Optional industrial temperature range -40 +85
dual power supply for the main power supply and backup power supply

DS1302 real-time clock module parameters are as follows:

1.PCB for the single-panel, size: 44mm * 23mm * 1.6mm

2. With 4 positioning holes, diameter 3.1mm

3. Theoretical data retention time greater than 10 years!

4. Crystal 32.768KHz, Japan imported crystal, matching capacitance of 6pF, size 2 * 6mm

5.DS1302 8-pin plug-in large chip made, the chip below IC Block, easy to replace and plug the chip

6. Module operating voltage is compatible with 3.3V / 5V, and 5V and 3.3V single-chip connection

7. Operating temperature: 0 ° --- 70 °

Wiring method： (to provide the program as an example, you can access any IO port, modify the port definition in the program can be):

VCC → + 5V / 3.3V

GND → GND

CLK → P02

DAT → P01

RST → P00


Package Included:
1pcs * RTC DS1302 Real Time Clock Module (Without battery)




Before purchase:
1. All the goods are in stock and we will dispatch immediately if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.

Shipment：
1.1-2 days to ship(except for the pro-order item)

After purchase:
1.If you are satisfied，please give us 5 stars praise.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems.
if you receive a defect item,please contact us at once with item picture or video



#RTC #DS1302 #Real #Time #Clock #M