Mô Đun Chuyển Đổi Tín Hiệu Điện Áp Hw-685 0 / 4-20ma Sang 0-3.3 / 5 / 10v
51.000
₫ 26.010
Sản phẩm Mô Đun Chuyển Đổi Tín Hiệu Điện Áp Hw-685 0 / 4-20ma Sang 0-3.3 / 5 / 10v đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 51.000 xuống còn ₫ 26.010, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to our store to find whatever you need,we will always be here for you!
HW-685 Current to Voltage Module 0/4-20mA to 0-3.3V/5V/10V Voltage Transmitter Signal Converter
Instructions for use:
1. The module is wired according to the definition, the power supply voltage is 7-36V (if the output is to 10V, the supply voltage must be greater than 12V)
2. After power-on, the D2 light should be on, otherwise check the line connection. The board is reversely protected, and the reverse connection does not burn.
3. When the current input is at the minimum value (0mA or 4mA), adjust the ZERO potentiometer to make the VOUT output the minimum value (0.0V or other voltage).
4. When the current input is at the maximum value (20mA), adjust the SPAN potentiometer to make the VOUT output the maximum value (3.3V or 5V or 10V. When the input is 4-20ma, the output can be as small as 2.5V)
Specifications:
Product size: 42mm*25mm*10mm/1.65*0.98*0.39"
Package weight: 11g
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
Included:
1 X Current to Voltage M
HW-685 Current to Voltage Module 0/4-20mA to 0-3.3V/5V/10V Voltage Transmitter Signal Converter
Instructions for use:
1. The module is wired according to the definition, the power supply voltage is 7-36V (if the output is to 10V, the supply voltage must be greater than 12V)
2. After power-on, the D2 light should be on, otherwise check the line connection. The board is reversely protected, and the reverse connection does not burn.
3. When the current input is at the minimum value (0mA or 4mA), adjust the ZERO potentiometer to make the VOUT output the minimum value (0.0V or other voltage).
4. When the current input is at the maximum value (20mA), adjust the SPAN potentiometer to make the VOUT output the maximum value (3.3V or 5V or 10V. When the input is 4-20ma, the output can be as small as 2.5V)
Specifications:
Product size: 42mm*25mm*10mm/1.65*0.98*0.39"
Package weight: 11g
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
Included:
1 X Current to Voltage M
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000