Mô đun Camera Mini 5MP cho Raspberry Pi 3 Model B+ mô đun 1080p 720p
₫ 74.400
Sản phẩm Mô đun Camera Mini 5MP cho Raspberry Pi 3 Model B+ mô đun 1080p 720p đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Connection method: The location of the connector: the 90-degree vertical connector, the one next to the HDMI port. When connecting, the contact side faces the HDMI interface
Software use:
-RPi firmware and raspi-config have been updated for the camera, please execute apt-get update; apt-get upgrade;
-Select camera in raspi-config, start the camera driver in the RPi firmware, and then restart
-Use command line programs raspivid and raspistill to operate the camera and capture video clips or images
-The captured video clip needs to be played by mplayer
How to broadcast the camera data through live webcast:
Through the nc command (ncat-Concatenate and redirect sockets), the input data of the camera is directly redirected to the network port for output
The following is a detailed description
parameter:
Lens: 1/4 5M
Aperture: 2.9
Focal length: 3.29
Field of view: 72.4 degrees
Hardware connection:
-Flexible flat cable, 90-degree vertical connector, the one next to the HDMI port. When connecting, the contact side faces the HDMI interface.
-Tear off the protective film on the lens before use
-Bare board, pay attention to ESD damage, beware of static electricity!
Software use:
-RPi firmware and raspi-config have been updated for the camera, please execute apt-get update; apt-get upgrade;
-Select camera in raspi-config, start the camera driver in the RPi firmware, and then restart
-Use command line programs raspivid and raspistill to operate the camera and capture video clips or images
-The captured video clip needs to be played by mplayer
How to broadcast the camera data through live webcast:
Through the nc command (ncat-Concatenate and redirect sockets), the input data of the camera is directly redirected to the network port for ou
Software use:
-RPi firmware and raspi-config have been updated for the camera, please execute apt-get update; apt-get upgrade;
-Select camera in raspi-config, start the camera driver in the RPi firmware, and then restart
-Use command line programs raspivid and raspistill to operate the camera and capture video clips or images
-The captured video clip needs to be played by mplayer
How to broadcast the camera data through live webcast:
Through the nc command (ncat-Concatenate and redirect sockets), the input data of the camera is directly redirected to the network port for output
The following is a detailed description
parameter:
Lens: 1/4 5M
Aperture: 2.9
Focal length: 3.29
Field of view: 72.4 degrees
Hardware connection:
-Flexible flat cable, 90-degree vertical connector, the one next to the HDMI port. When connecting, the contact side faces the HDMI interface.
-Tear off the protective film on the lens before use
-Bare board, pay attention to ESD damage, beware of static electricity!
Software use:
-RPi firmware and raspi-config have been updated for the camera, please execute apt-get update; apt-get upgrade;
-Select camera in raspi-config, start the camera driver in the RPi firmware, and then restart
-Use command line programs raspivid and raspistill to operate the camera and capture video clips or images
-The captured video clip needs to be played by mplayer
How to broadcast the camera data through live webcast:
Through the nc command (ncat-Concatenate and redirect sockets), the input data of the camera is directly redirected to the network port for ou