Bộ Tăng Áp Động Cơ Hai Mặt F1-z Chuyên Dụng Cho Xe Hơi
₫ 297.100
Sản phẩm Bộ Tăng Áp Động Cơ Hai Mặt F1-z Chuyên Dụng Cho Xe Hơi đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Warranty Type:No Warranty
Warranty Period:Less than 1 month
Brand:No Brand
Warranty Type:Supplier Warranty
Warranty Period:6 months - 1 year
What's in the Box:Automotive Tools & Equipment
Vehicle Model:All Vehicle Models
product description
The single-sided turbine is installed on the intake hose of the engine. When the engine is normally started, the inertial pulling force of the natural intake of the engine is used to drive the space wheel to rotate at a high speed, and a large amount of fresh air is continuously driven into the engine while rotating. At the same time, the incoming air is vortexed in a forced manner, so that the high-speed rotating air can be mixed with the fuel injected from the injector, and the air density in the intake hose can be greatly improved, and the efficiency of the mixture can be improved. It is sure to increase greatly, and it will generate more explosive force when burning, and it will actually improve the power.
Color: blue, red
Weight: 220g
Size: Thick double-sided wheel with a diameter of about 6.5 and a length of about 7.5.
Material: aluminum alloy + silicone
Accessories: double-sided turbine three caliber silicone sleeve heights are 55mm1.552.65+3.71mm
Applicable models: General
Installation instructions: Installed in the intake hose between the original car bellows and the throttle valve, when installing, look at the diameter of the original car's intake hose and configure the thickness of the rubber collar with the power wheel itself. The three rubber collars have different thicknesses and are appropriately selected according to the diameter of the intake hose during installation.
Applicable vehicle size (for reference only) Toyota 56-65mm (800cc~2000cc) Mazda 71mm (greater than 2000cc) Ford 56-71mm (800cc~ greater than 2000cc) Honda 71mm (greater than 2000cc) Mitsubishi 71mm (greater than 2000cc) Nissan 65mm
(1300cc~2000cc) (There are three kinds of caliber silicone sleeves (the height is 55mm) available for selection: 1.55mm2.65mm3.
Warranty Period:Less than 1 month
Brand:No Brand
Warranty Type:Supplier Warranty
Warranty Period:6 months - 1 year
What's in the Box:Automotive Tools & Equipment
Vehicle Model:All Vehicle Models
product description
The single-sided turbine is installed on the intake hose of the engine. When the engine is normally started, the inertial pulling force of the natural intake of the engine is used to drive the space wheel to rotate at a high speed, and a large amount of fresh air is continuously driven into the engine while rotating. At the same time, the incoming air is vortexed in a forced manner, so that the high-speed rotating air can be mixed with the fuel injected from the injector, and the air density in the intake hose can be greatly improved, and the efficiency of the mixture can be improved. It is sure to increase greatly, and it will generate more explosive force when burning, and it will actually improve the power.
Color: blue, red
Weight: 220g
Size: Thick double-sided wheel with a diameter of about 6.5 and a length of about 7.5.
Material: aluminum alloy + silicone
Accessories: double-sided turbine three caliber silicone sleeve heights are 55mm1.552.65+3.71mm
Applicable models: General
Installation instructions: Installed in the intake hose between the original car bellows and the throttle valve, when installing, look at the diameter of the original car's intake hose and configure the thickness of the rubber collar with the power wheel itself. The three rubber collars have different thicknesses and are appropriately selected according to the diameter of the intake hose during installation.
Applicable vehicle size (for reference only) Toyota 56-65mm (800cc~2000cc) Mazda 71mm (greater than 2000cc) Ford 56-71mm (800cc~ greater than 2000cc) Honda 71mm (greater than 2000cc) Mitsubishi 71mm (greater than 2000cc) Nissan 65mm
(1300cc~2000cc) (There are three kinds of caliber silicone sleeves (the height is 55mm) available for selection: 1.55mm2.65mm3.
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000