Bộ tăng áp động cơ cho xe ô tô F1-Z
273.000
₫ 222.500
Sản phẩm Bộ tăng áp động cơ cho xe ô tô F1-Z đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 273.000 xuống còn ₫ 222.500, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
F1-z power wheel double wheel-thickening
Materials: aluminum alloy
Single impeller, double impeller size diameter: 65mm
Suitable for installling intake tube caliber: 65mm-74mm please measure the car yourself
Intake tube, self-determination.
Note: if the inner diameter of the intake tube is greater than 6.4 cm and less than 6.4 cm, the intake tube must be changed
Applicable to vehicle size(For information only)Toyota 56-65mm(800cc~2000cc)Mazda 71mm(Greater than 2000cc)Ford 56-71mm(800cc~> 2000cc)Honda 71mm(Greater than 2000cc)Mitsubishi 71mm(Greater than 2000cc)65mm per day(1300cc~2000cc)(There are three caliber silicone sets(Height is 55mm)Optional: 1.55 mm2.65 mm3.71 mm)3 pcs for double sided matching here
Product characteristics: product features
High-speed precision bearings are used.The speed can reach 3000rpm.
Gravity casting aluminum alloy material design, rust-proof is not easy to fail.
Fan blade professional angle design, enhance gas flow rate.
New exclusive diamond guide hole design, increase intake kinetic energy and stability.
Installlation method
Installlation position: installled between throttle and air filter, inlaid into wind tube (fan turbine facing air filter).
Ideal location (recommendation): as for the throttle door 10cm~30cm.
If the wind intake tube is curved, it can also be installled in the middle of the intake tube.
If the vehicle is equipped with a flow sensor, it can also be installled in a front-and-back position (the rubber covers available for this product meet the requirements of the various types of vehi
Materials: aluminum alloy
Single impeller, double impeller size diameter: 65mm
Suitable for installling intake tube caliber: 65mm-74mm please measure the car yourself
Intake tube, self-determination.
Note: if the inner diameter of the intake tube is greater than 6.4 cm and less than 6.4 cm, the intake tube must be changed
Applicable to vehicle size(For information only)Toyota 56-65mm(800cc~2000cc)Mazda 71mm(Greater than 2000cc)Ford 56-71mm(800cc~> 2000cc)Honda 71mm(Greater than 2000cc)Mitsubishi 71mm(Greater than 2000cc)65mm per day(1300cc~2000cc)(There are three caliber silicone sets(Height is 55mm)Optional: 1.55 mm2.65 mm3.71 mm)3 pcs for double sided matching here
Product characteristics: product features
High-speed precision bearings are used.The speed can reach 3000rpm.
Gravity casting aluminum alloy material design, rust-proof is not easy to fail.
Fan blade professional angle design, enhance gas flow rate.
New exclusive diamond guide hole design, increase intake kinetic energy and stability.
Installlation method
Installlation position: installled between throttle and air filter, inlaid into wind tube (fan turbine facing air filter).
Ideal location (recommendation): as for the throttle door 10cm~30cm.
If the wind intake tube is curved, it can also be installled in the middle of the intake tube.
If the vehicle is equipped with a flow sensor, it can also be installled in a front-and-back position (the rubber covers available for this product meet the requirements of the various types of vehi
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000