Bộ Chuyển Đổi Điều Khiển Từ Xa Rf Wifi Rf 300-928mhz Cho 41brands Of Taotao3C Tiện Dụng
666.000
₫ 380.000
Sản phẩm Bộ Chuyển Đổi Điều Khiển Từ Xa Rf Wifi Rf 300-928mhz Cho 41brands Of Taotao3C Tiện Dụng đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 666.000 xuống còn ₫ 380.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,8 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
on the picture
Specifications:
Input voltage:DV5V
Standby power:<1W
Working frequency:WIFI：2.4~2.48GHZ / RF remote：240Mhz~930MHZ
RF remote control power:20dbm
Receiver sensitivity:2kbps,GFSK -121DBM / 40kbps, GFSK, -105DBM 40kbps, OOK, -102DBM
WIFI receiving sensitivity:802.11 b:-91dBm(11 Mbps) / 802.11 g:-75dBm(54Mbps) 802.11 n:-72dBm(MCS7)
WIFI transmission power:802.11 b: +20 dBm / 802.11 g: +17 dBm / 802.11 g: +16dBm
Encryption type:WEP/TKIP/AES
Security mechanism:WAP/WAP2
Working environment:Temperature：-10℃~﹢70℃ / Humidity：5%~93%
Storage environment:Temperature：-20℃~﹢70℃ / Humidity：5%~93%
Dimension:L67.5*W54*H19.5（mm）
Supporting device:Android5.0 /IOS10.1and above
Package Included:
Controller * 1
Charging cable* 1
Notes:
>Note
1. Please do not put the device in a closed corner, and the distance from the device to the router is within
10m to ensure normal oommunication. This can better ensure the stability of the device connection.
2. The device and the phone need to be connected to the same router when the device is added.
3. By pressing the TEST button to test the remote control, each time it is a long beep, check whether the remote control is kept at the required distance from the device, and whether the remote controller used is properly coded.(If the remote control makes a long beep during muitiple tests. the remote control code format device does not support)
4. Can add up to about 100 type remote controls.(Different brands have different data sizes, and the actual quantity is subject to actual addition)
· The remote control that is not needed is deleted as much as possible, leaving room for subsequent addition of the remote control.
The remote control is out of quantity and the remote control cannot be added Need to delete some remote controls and add them.
◆The factory settings are restored on the APP, and all remote control data can be cleared at one time.
5. The add device(device access network) timeout can perform the following checks: Please make sure connecting 2.4 GWIFI equipments. It wil be faled f connect 5G network.
Set SSID hide button to open when adding device, and then configure device network.
· Press the button for 3 times and the green indicator will flash to start the network distribu
on the picture
Specifications:
Input voltage:DV5V
Standby power:<1W
Working frequency:WIFI：2.4~2.48GHZ / RF remote：240Mhz~930MHZ
RF remote control power:20dbm
Receiver sensitivity:2kbps,GFSK -121DBM / 40kbps, GFSK, -105DBM 40kbps, OOK, -102DBM
WIFI receiving sensitivity:802.11 b:-91dBm(11 Mbps) / 802.11 g:-75dBm(54Mbps) 802.11 n:-72dBm(MCS7)
WIFI transmission power:802.11 b: +20 dBm / 802.11 g: +17 dBm / 802.11 g: +16dBm
Encryption type:WEP/TKIP/AES
Security mechanism:WAP/WAP2
Working environment:Temperature：-10℃~﹢70℃ / Humidity：5%~93%
Storage environment:Temperature：-20℃~﹢70℃ / Humidity：5%~93%
Dimension:L67.5*W54*H19.5（mm）
Supporting device:Android5.0 /IOS10.1and above
Package Included:
Controller * 1
Charging cable* 1
Notes:
>Note
1. Please do not put the device in a closed corner, and the distance from the device to the router is within
10m to ensure normal oommunication. This can better ensure the stability of the device connection.
2. The device and the phone need to be connected to the same router when the device is added.
3. By pressing the TEST button to test the remote control, each time it is a long beep, check whether the remote control is kept at the required distance from the device, and whether the remote controller used is properly coded.(If the remote control makes a long beep during muitiple tests. the remote control code format device does not support)
4. Can add up to about 100 type remote controls.(Different brands have different data sizes, and the actual quantity is subject to actual addition)
· The remote control that is not needed is deleted as much as possible, leaving room for subsequent addition of the remote control.
The remote control is out of quantity and the remote control cannot be added Need to delete some remote controls and add them.
◆The factory settings are restored on the APP, and all remote control data can be cleared at one time.
5. The add device(device access network) timeout can perform the following checks: Please make sure connecting 2.4 GWIFI equipments. It wil be faled f connect 5G network.
Set SSID hide button to open when adding device, and then configure device network.
· Press the button for 3 times and the green indicator will flash to start the network distribu